> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Ray Bellis
> Sent: Saturday, April 03, 1999 08:32
> To: portmaster-users@livingston.com
> Subject: (PM) Analogue calls not being rejected.
>
>
> I've just put in my first PM3 (ComOS 3.8.2) with the intention of
> it being used for ISDN call termination only, and
> therefore the box doesn't have any modems.
>
> At the moment the box isn't in my hunt group, but once it's
> tested it will be first in the group, analogue calls are
> then supposed to fall through to the USR TC racks I've already got.
>
> What's confusing me is that if I call the PM with an analogue
> device the call doesn't get rejected with a busy-tone,
> which is what I believed is supposed to happen if I don't have
> any modems. Instead I get one short beep and then about
> five seconds later a continuous beep.
>
> ISDN debug shows:
>
> S0: Sending Request Connect - 56Kbps / Voice (B5 ID:2)
> S0: Received Connect - B5
>
> .
> .
> .
>
> S0: Received Disconnect Normal Clearing (B5 ID:2)
> S0: Sending Disconnect Request
> S0: Received Clear Conf (B5 ID:2)
>
> Just once the debug also showed that it was sending SABME packets
> once a second, and those didn't start until the
> continuous beep was heard.
>
> Why isn't the call simply being rejected?
>
> thanks,
>
> Ray.
>
> --
> Ray Bellis, MA(Oxon) - Technical Director - Oxford CommUnity Internet plc
> Windsor House, 12 High Street, Kidlington, OXFORD OX5 2PJ UK
> Telephone: +44-1865-856000 Fax: +44-1865-856001
> Email: ray.bellis@community.net.uk URL: http://www.community.co.uk/
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>