RE: (PM) Analogue calls not being rejected. (fwd)
James Courtier-Dutton (dutton@livingston-ent.co.uk)
Sun, 4 Apr 1999 00:40:23 +0100
> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of MegaZone
> Sent: Saturday, April 03, 1999 11:21
> To: PortMaster Users
> Subject: RE: (PM) Analogue calls not being rejected. (fwd)
>
>
> Once upon a time James Courtier-Dutton shaped the electrons to say...
> >If you want ISDN calls only, I would run the PM3 in callcheck mode.
> >Then you can configure Radius to reject all non-ISDN calls from
> a particular
> >NAS before answering them.
>
> Of course that means having one phone number for ISDN and another
> for modems.
No, you use the NAS-Port-Type.... In theory ... :-)
The question is does callcheck send NAS-Port-Type in the callcheck radius
request.
>
> -MZ
> --
> -=*X I'm going down... under that is!
> <URL:http://www.aussie-isp.net/> X*=-
> <URL:mailto:megazone@megazone.org> Gweep, Discordian, Author,
> Engineer, me..
> Join ISP/C Internet Service Providers' Consortium
> <URL:http://www.ispc.org/>
> "A little nonsense now and then, is relished by the wisest men"
> 781-788-0130
> <URL:http://www.megazone.org/> <URL:http://www.gweep.net/> Hail
> Discordia!
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>