Re: (PM) Quick Questions About Padding

David Glynn (dglynn@mathware.com)
Tue, 06 Apr 1999 16:39:08 -0500

At 10:26 AM 4/6/99 -0700, Douglas Michaud wrote:
>In message <00a401be804f$bccc4d30$34fb76cc@burgoyne.com>, "Sparky" writes:
>>Adding to Nicks question is there a way to change teh padding levels on the
>>pm3 themselves?
>
>no. FDL or buildout or padding or whatever you want to call it is not
>a configurable option on the pm3. even if it was, you'd need to do it
>in concert with the telco to have the proper effect.

Makes sense. Does anyone have any documentation on this command? I searched
the Lucingston site, and browsed through release notes, and even trolled
through some PM-4 docs.

pm3> set line1 TX-level
Error: TX level must be 0x0100 - 0x8000

and the help file proved less than helpful

rr1ct3> help set line#
Usage: set line# Value
rr1ct3> help set line# TX-level
Invalid command. Use 'help set line# ' for assistance.

pm3> ver
Livingston PortMaster PM-3 ComOS 3.8.2
System uptime is 13 hours 3 minutes
Channelized T-1's, AMI-D4 and B8ZS-ESF mix.

sh line1 gives me a receive level report, and seeing something that looks
like transmit level makes me wonder if I'm crossing all T's and dotting all
I's.

David Glynn When asked "Who owns the Internet?";
dglynn@mathware.com
68% of corporate execs said a corporation
23% said it was Microsoft

98% of 6th graders said: no one.

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>