> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Sparky
> Sent: Tuesday, April 06, 1999 11:19
> To: portmaster-users@livingston.com
> Subject: Re: (PM) Quick Questions About Padding
>
>
> My telco is asking me to change the padding on my equipment.
> They have set
> it at a certain level and want us to try changing ours to see if
> it makes a
> difference on cutting down disconnects. They say that they have had other
> companies do it but when asked who and what equipment of course
> they didn't
> know.
>
> Sparky
>
>
> "Sparky" writes:
> : >>Adding to Nicks question is there a way to change teh padding
> levels on
> the
> : >>pm3 themselves?
> : >
> : >no. FDL or buildout or padding or whatever you want to call it is not
> : >a configurable option on the pm3. even if it was, you'd need to do it
> : >in concert with the telco to have the proper effect.
> :
> : Makes sense. Does anyone have any documentation on this command? I
> searched
> : the Lucingston site, and browsed through release notes, and even trolled
> : through some PM-4 docs.
> :
> : pm3> set line1 TX-level
> : Error: TX level must be 0x0100 - 0x8000
> :
> : and the help file proved less than helpful
> :
> : rr1ct3> help set line#
> : Usage: set line# Value
> : rr1ct3> help set line# TX-level
> : Invalid command. Use 'help set line# ' for assistance.
> :
> : pm3> ver
> : Livingston PortMaster PM-3 ComOS 3.8.2
> : System uptime is 13 hours 3 minutes
> : Channelized T-1's, AMI-D4 and B8ZS-ESF mix.
> :
> : sh line1 gives me a receive level report, and seeing something
> that looks
> : like transmit level makes me wonder if I'm crossing all T's and dotting
> all
> : I's.
> :
> : David Glynn When asked "Who owns the Internet?";
> : dglynn@mathware.com
> : 68% of corporate execs said a corporation
> : 23% said it was Microsoft
> :
> : 98% of 6th graders said: no one.
> :
> :
> : -
> : To unsubscribe, email 'majordomo@livingston.com' with
> : 'unsubscribe portmaster-users' in the body of the message.
> : Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> :
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>