One involves the T1 signal. If "show line" is not indicating any
errors, you are probably just fine.
The other involves the data within each channel and is set by the telco
switch. This one may have significant effect on modem connectivity.
jon-lists wrote:
>
> I had GTE check our PRI circuit performance since Livingston told me the
> receive level should be "+2db to -7db" instead of what it is "-7.5db to
> -12.5db". While Mr. GTE was looking at it he told me the Padding Level was
> set to 10, which seemed very high to him. He lowered it, but has soon as he
> did none of our ISDN customers could connect to the PM3. Analog modem
> dialers seemed to be unaffected. I had him move it back to 10, and ISDN
> callers could get back in.
>
> So much for trying to tweak that.
>
> It still didn't do anything to explain to me why Lucent says our receive
> level is lower than it optimally should be. GTE didn't give me any
> explanations on that one, but the funny thing was they also didn't confirm
> or deny the validity of Lucent's statement.
>
> At 02:38 AM 4/8/99 -0700, MegaZone wrote:
> >Once upon a time Sparky shaped the electrons to say...
> >>Adding to Nicks question is there a way to change teh padding levels on the
> >>pm3 themselves?
> >
> >No, the padding is on the telco switch and the NAS doesn't play a role in
> >that.
> >
> >-MZ
> >--
> >-=*X I'm going down... under that is! <URL:http://www.aussie-isp.net/> X*=-
> ><URL:mailto:megazone@megazone.org> Gweep, Discordian, Author, Engineer, me..
> >Join ISP/C Internet Service Providers' Consortium <URL:http://www.ispc.org/>
> >"A little nonsense now and then, is relished by the wisest men" 781-788-0130
> ><URL:http://www.megazone.org/> <URL:http://www.gweep.net/> Hail Discordia!
> >-
> >To unsubscribe, email 'majordomo@livingston.com' with
> >'unsubscribe portmaster-users' in the body of the message.
> >Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>