> Is there some setting besides set loghost that control's this?
Yes, you need to set the syslog options. For Example:
Command> show syslog
Syslog Configuration Settings
admin-logins: auth.info
user-logins: auth.info
packet-filters: local0.alert
commands: auth.debug
termination: auth.info
nat: auth.info
ipsec: disabled
Command> set syslog
Missing parameter "", please choose from:
ADmin-logins COmmands IPSec NAT
PAcket-filters TErmination USer-logins
Command> set syslog nat ?
facility.priority - valid values are:
Facilities: kern user mail daemon auth syslog lpr news uucp
cron local0 local1 local2 local3 local4 local5 local6
local7<CR>
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>