> This mail is being sent to the portmaster-users@livingston.com and
> radiator@open.com.au mailing lists, simply because I cannot figure out
> where the error is occuring.
This message was also CC'ed to support@livingston.com. Please do not do
that as support does not know if the message was intended for them or the
mail lists. It is best to send a separate message.
> The Radiator logs then show that the authentication succeeds (as expected)
> and I assume issues a Auth ACK packet back to the NAS. 50% of the time
> the user gets on OK, the other 50% of the time the connection just sits
> there until it times out and kicks the user off.
setup a filter for RADIUS packets on the PortMaster and run ptrace to see if
the packets are getting back to the PM. You also may want to try ComOS
4.1b15 on the PM4.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>