Re: (PM) Two odd PM3 behaviors...

Jason Slagle (raistlin@tacorp.net)
Fri, 9 Apr 1999 12:40:14 -0400 (EDT)

That really sounds like a bad flash to me. I have observed that when you
don't have all the modem code there, the pm3 will pick up the phone and
emit that constant tone.

Jason

---
Jason Slagle                        
Network Administrator - Toledo Internet Access - Toledo Ohio
- raistlin@tacorp.net - jslagle@toledolink.com - WHOIS JS10172 


On Fri, 9 Apr 1999, Derric Scott wrote:


> 
> Hello:
> 
> Anyone else seeing either of these two???
> 
> 1. phone dials, customer hears CLICK, CLICK, then message from phone
> 	company about unable to complete call as dialed.  This happens
> 	once in about every dozen or so calls.  The next attempt is usually
> 	good.  (This may be a telco issue, however it went completely away
> 	several weeks ago, but a power cycle on the PM3s caused it to
> 	return).
> 
> 2. PM3 modem answers and almost immediately goes into a solid, constant
> 	frequency tone forever.  Type of modem on the client end doesn't
> 	seem to matter.  This one also happens about every 8 - 10 calls.
> 	The next attempt is usually good too.
> 
> Just looking for some ideas...
> 
> Thanks.
> 
> Derric
> 
> -- 
> Derric Scott          Idea-Works, LLC / Scott.Net.         P. O. Box 361353
> dtscott@idea-works.net        (205)987-5889            Birmingham, AL 35236
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> 


-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>