RE: (PM) Migration of PM2 to PM3
James Courtier-Dutton (dutton@livingston-ent.co.uk)
Fri, 9 Apr 1999 17:58:50 +0100
> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Nair, Shibu
> (MED, Wipro Systems, Inc)
> Sent: Friday, April 09, 1999 04:26
> To: 'portmaster-users@livingston.com'
> Subject: (PM) Migration of PM2 to PM3
>
>
> Hi
>
> (Pls do a group reply for this mail as iam not getting mails from the
> mailing list- Looks like some problem)
>
> I have an existing dial up setup with pormaster2e .
>
> We use this equipment mostly for dialing out. Here creation of
> location and dialing intialisation will be done remotly from a utility
> which is available acroos all machines. Now migration of Portmaster2e to
> PM3 should not affect on these functions.
>
> During the dialing out on PM2e (from the utility), if i do a "sh
> loc" i get the following,
>
Set loc xyz analog on. (you still want to make modem calls.)
You cannot use async scripts with ISDN locations.
> Portmaster2e> sh loc xyz
> Location: 337837 Type: Manual
> Destination: 172.24.95.1 Netmask: 255.255.255.255
> Protocol: PPP Options: Quiet, Compression
> Input Filter: prod.in Output Filter:
> Group: 0 Max Ports: 1
> Idle Timeout: 2 minutes High Mark: 0 bytes
> Mtu: 1500 Async Map: 00000000
>
> Dial Script: Send Command Wait for Reply
> ------------------------------
> ------------------------------
> ATDT8w6028603640\r CONNECT
> ppp\r ~
>
> Here the last part is AT command string which execute and
> establish the connection (pls correct me if iam wrong)...
>
> My new PM3 has one ISDN PRI connection and digital modem cards
> installed (for analog connection support).
>
> Now using PRI on PM3 what i need to do to get the same
> configuration (which is on PM2) for a location so that there will not be
> any changes (or i can acheive the same)on the software.tool...
>
> Do i have to do any other changes on my utility so that there
> will not be any problems on the user end to dial out from my site...
>
> There will be couple of changes between existing setup and
> planned setup
> which are,
> 1) If we decide and work perfect upgrade all PM2e to
> PM3 (Globally)
> 2) Instead of analog lines on PM2E, it will be PRI with
> digital modem cards
>
> I appreciate ur help on this, Iam looking for a smooth migration
> ....
>
> TIA
>
> Regards
> Shibu
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>