1. After following instructions on the PM3 web page I got a client's
Ascend P85 to connect to my PM 3 using BOD via BACP. Still having
problem with one feature and it's one most my clients would really
like: use the second B channel to receive faxes and then have the 2nd
channel reconnect to our PM3 when bandwidth requirements demand. Right
now BOD via BACP only works the first time. That is: the second
channel will connect to PM3 as you would expect (threshold exceeded),
client gets a voice call to fax machine on channel 2, channel 2 drops
call to PM3, channel 2 answers fax call, fax completes, BOD now seems to
be disabled. Even 100% utilzation on the first channel will not cause
the second channel to come up. Anyone have a solution? Anyone
successfully implemented BACP as described above with any other
equipment?
2. Having problems with an Netgear RT328 connecting to PM3 (COMOS 3.8.2)
wtih 2 channels using BOD. Only can make single channel work. Checked
out Netgear web page and they recommend disabling BACP on RT328 to get 2
channels to work. Will it? Haven't tried that yet. Any other
recommendations from the list? Client owns RT328. Recommendations for
future clients???
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>