> "Nair, Shibu (MED, Wipro Systems, Inc)" wrote:
> >
> > As i did not get any reply iam resending the same mail...
>
> I saw an answer. You may want to check you mail server.
;) I saw 3 reposts for the "3 questions" maybe some mail delivery problems
on Shibu's end?
> > 2) I heard only ComOs 3.8.2 and later will support for
> > V.90 complaint calls... Is that true? (My PM3 version is 3.8)
Shibu, you need to learn to read release notes!
ComOS 3.8 supports the ITU standard V.90. V.90 is now supported for
Lucent, 3Com, and Rockwell chipset client modems dialing in. V.90 is
supported for a-law and u-law.
V.90 is not supported for dial-out. The maximum analog dial-out speed
is 33600bps for V.34, K56flex, and V.90.
> ComOS 3.8 and above support incoming V.90 calls.
8) like the release notes say...
> > 3) What is the alternate suggestion if i can not use AT
> > commands on location table (scripts) on PM3 (PRI/Digital modem setup )
> > (somebody specified on the mailing list)
>
> What AT commands do you need to use? There should not be any needed for the
> PM to dail correctly if the location options are set up correctly.
at&n-- Unrestricted 64Kbps data connection.
at&n0-- 3.1KHz audio service. On a PortMaster 3, use this command to
place a modem call.
at&n1-- Speech service. On a PortMaster 3, use this command to place a
modem call.
at&n55-- 3.1KHz audio service.
at&n56-- Restricted 56Kbps data connection.
at&n64-- Unrestricted 64Kbps data connection.
Those are listed on:
http://www.livingston.com/tech/docs/command/async.html
and should also be in the list archives a few times.
-- Aloha from Paradise,Sherwood Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>