Good luck
Cheers
James
> -----Original Message-----
> From: pmuser@speedynet.net [mailto:pmuser@speedynet.net]
> Sent: Thursday, April 29, 1999 05:23
> To: dutton@livingston-ent.co.uk
> Cc: portmaster-users@livingston.com
> Subject: RE: (PM) Livingston ORU, just got my first..
>
>
> Howdy,
>
> As requested:
>
> sh isdn d0 yielded...
>
> Command> sh isdn d0
> D00 status -----------------------(127) 100 101 --------- BRI_NI1
> Interface state: F7- active
> Init count: 1 uptime: 0 last state change: 0
> recv count: 109 xmit: 107 errors: 0
> numberplan type: Local plan: ISDN E.164
> S1 ---------------------------------------------------------------
> Ces state: Registered last change: 0 Port state: IDLE
> Directory: 3309459486 SPID: 33094594860101 regs: 1
> Called: Caller: Flags: 0x00
> Connects: 0 last connect: 0 b channel: 1 0
> Setup: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 248: msg 19 SPID Register ERROR, cause 1 Unassigned Number
> 248: msg 19 SPID Register ERROR, cause 1 Unassigned Number
> 249: msg 19 SPID Register ERROR, cause 1 Unassigned Number
> S2 ---------------------------------------------------------------
> Ces state: Registered last change: 0 Port state: IDLE
> Directory: 3309459487 SPID: 33094594870101 regs: 1
> Called: Caller: Flags: 0x00
> Connects: 0 last connect: 0 b channel: 2 1
> Setup: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>
> That error helps a bit... though not sure exaactly what it
> means...these values were taken right from my TA currently using the line.
>
>
> As for the Version:
>
> Command> ver
> Livingston PortMaster Office Router ComOS 3.7.2Lc4
> System uptime is 2 minutes
>
>
> Finally, the global settings are:
>
> Command> sh glo
> System Name:
> Default Host: 0.0.0.0
> Alternate Hosts:
> IP Gateway: 207.166.215.1
> Gateway Metric: 1
> Default Routing: Quiet (Off)
> Name Service: DNS
> Name Server: 207.166.215.30, 207.166.215.36
> Domain:
> Telnet Access Port: 23
> Loghost: 0.0.0.0
> Maximum PMconsole: 1
> Assigned Address: 0.0.0.0
> RADIUS Server: 0.0.0.0
> Alternate Server: 0.0.0.0
> Accounting Server: 0.0.0.0
> Alt. Acct. Server: 0.0.0.0
> PPP Authentication: PAP: on CHAP: on
> ISDN Switch Type: NI-1
> ISDN MSN: off
> Disabled Modules: SNMP IPX OSPF BGP
>
> Now, am I correct in m understanding that I would only use a
> radius and an accounting server settings if this box were being
> dialed into? Also, is that the best way to go if I'm going to be
> calling this box back for dialback purposes, or just setup a
> location and a user on the ORU since we're only dealing with one account?
>
> Thanks!
> -Boze
>
> -----Original Message-----
> From: James Courtier-Dutton [mailto:dutton@livingston-ent.co.uk]
> Sent: Thursday, April 29, 1999 5:58 AM
> To: pmuser@speedynet.net; portmaster-users@livingston.com
> Subject: RE: (PM) Livingston ORU, just got my first..
>
>
> Hello
> Try telnet to the OR and do "sh isdn d0" and dump the output to the list.
> with a "ver" and "sh global"
> Cheers
> James
>
>
> > -----Original Message-----
> > From: owner-portmaster-users@livingston.com
> > [mailto:owner-portmaster-users@livingston.com]On Behalf Of
> > pmuser@speedynet.net
> > Sent: Thursday, April 29, 1999 05:49
> > To: portmaster-users@livingston.com
> > Subject: (PM) Livingston ORU, just got my first..
> >
> >
> > Sorry for having to send this again... though I imagine no one
> > has seen it - just found out all the email from my systems has
> > gone out from one account only.
> > Anyway, here it is...
> >
> > Howdy all,
> >
> > I just got a hold of my first Livingston Portmaster ORU (er uh
> > Lucent, sorry). Actually it came Mon. thanks Jake!
> >
> > Was able to get it configured without any troubles but I'm having
> > a bit of a problem.
> >
> > I'm certain it is something I'm missing/doing wrong.
> >
> > I have assigned the unit an IP address (207.166.215.91) from our
> > class C and netmask of 255.255.255.0
> >
> > As I continue through the ORWizard I get to the configure part
> > and it does fine until it dials the ISP (which is me of course)
> > and it it says:
> >
> > "There was no answer to the phone number you entered. Please
> > verify that the number entered was correct."
> >
> > "Press Retry to verify phone number or Cancel to save the current
> > configuration and exit the wizard."
> >
> > I have verified the switch information - and it is correct, in
> > fact when I tried changing it I received an error about the
> > switch type as expected.
> >
> > I have a network user added - very similar to that of another
> > network user who's connection that does work (only difference is
> > line type, one analog this new one ISDN of course). Is this a
> > common error? Any suggestions?
> >
> > Thanks!
> > -Boze
> >
> > -
> > To unsubscribe, email 'majordomo@livingston.com' with
> > 'unsubscribe portmaster-users' in the body of the message.
> > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
> >
>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>