Just a thought...
Stephen
------------------- Follow the Leader! - Exis Net -----------------
Stephen Zedalis Phone: (757)552-1009 Fax: (757)552-1019
System Administrator Tech Support Email - support@exis.net
tintype@exis.net Billing Email - billing@exis.net
-------------------------------------------------------------------
On Thu, 29 Apr 1999 pmuser@speedynet.net wrote:
>Howdy,
>
>As requested:
>
>sh isdn d0 yielded...
>
>Command> sh isdn d0
>D00 status -----------------------(127) 100 101 --------- BRI_NI1
>Interface state: F7- active
>Init count: 1 uptime: 0 last state change: 0
>recv count: 109 xmit: 107 errors: 0
>numberplan type: Local plan: ISDN E.164
>S1 ---------------------------------------------------------------
> Ces state: Registered last change: 0 Port state: IDLE
> Directory: 3309459486 SPID: 33094594860101 regs: 1
> Called: Caller: Flags: 0x00
> Connects: 0 last connect: 0 b channel: 1 0
> Setup: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>248: msg 19 SPID Register ERROR, cause 1 Unassigned Number
>248: msg 19 SPID Register ERROR, cause 1 Unassigned Number
>249: msg 19 SPID Register ERROR, cause 1 Unassigned Number
>S2 ---------------------------------------------------------------
> Ces state: Registered last change: 0 Port state: IDLE
> Directory: 3309459487 SPID: 33094594870101 regs: 1
> Called: Caller: Flags: 0x00
> Connects: 0 last connect: 0 b channel: 2 1
> Setup: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>
>That error helps a bit... though not sure exaactly what it means...these values were taken right from my TA currently using the line.
>
>
>As for the Version:
>
>Command> ver
>Livingston PortMaster Office Router ComOS 3.7.2Lc4
>System uptime is 2 minutes
>
>
>Finally, the global settings are:
>
>Command> sh glo
> System Name:
> Default Host: 0.0.0.0
> Alternate Hosts:
> IP Gateway: 207.166.215.1
> Gateway Metric: 1
> Default Routing: Quiet (Off)
> Name Service: DNS
> Name Server: 207.166.215.30, 207.166.215.36
> Domain:
>Telnet Access Port: 23
> Loghost: 0.0.0.0
> Maximum PMconsole: 1
> Assigned Address: 0.0.0.0
> RADIUS Server: 0.0.0.0
> Alternate Server: 0.0.0.0
> Accounting Server: 0.0.0.0
> Alt. Acct. Server: 0.0.0.0
>PPP Authentication: PAP: on CHAP: on
> ISDN Switch Type: NI-1
> ISDN MSN: off
> Disabled Modules: SNMP IPX OSPF BGP
>
>Now, am I correct in m understanding that I would only use a radius and an accounting server settings if this box were being dialed into? Also, is that the best way to go if I'm going to be calling this box back for dialback purposes, or just setup a location and a user on the ORU since we're only dealing with one account?
>
>Thanks!
>-Boze
>
>-----Original Message-----
>From: James Courtier-Dutton [mailto:dutton@livingston-ent.co.uk]
>Sent: Thursday, April 29, 1999 5:58 AM
>To: pmuser@speedynet.net; portmaster-users@livingston.com
>Subject: RE: (PM) Livingston ORU, just got my first..
>
>
>Hello
>Try telnet to the OR and do "sh isdn d0" and dump the output to the list.
>with a "ver" and "sh global"
>Cheers
>James
>
>
>> -----Original Message-----
>> From: owner-portmaster-users@livingston.com
>> [mailto:owner-portmaster-users@livingston.com]On Behalf Of
>> pmuser@speedynet.net
>> Sent: Thursday, April 29, 1999 05:49
>> To: portmaster-users@livingston.com
>> Subject: (PM) Livingston ORU, just got my first..
>>
>>
>> Sorry for having to send this again... though I imagine no one
>> has seen it - just found out all the email from my systems has
>> gone out from one account only.
>> Anyway, here it is...
>>
>> Howdy all,
>>
>> I just got a hold of my first Livingston Portmaster ORU (er uh
>> Lucent, sorry). Actually it came Mon. thanks Jake!
>>
>> Was able to get it configured without any troubles but I'm having
>> a bit of a problem.
>>
>> I'm certain it is something I'm missing/doing wrong.
>>
>> I have assigned the unit an IP address (207.166.215.91) from our
>> class C and netmask of 255.255.255.0
>>
>> As I continue through the ORWizard I get to the configure part
>> and it does fine until it dials the ISP (which is me of course)
>> and it it says:
>>
>> "There was no answer to the phone number you entered. Please
>> verify that the number entered was correct."
>>
>> "Press Retry to verify phone number or Cancel to save the current
>> configuration and exit the wizard."
>>
>> I have verified the switch information - and it is correct, in
>> fact when I tried changing it I received an error about the
>> switch type as expected.
>>
>> I have a network user added - very similar to that of another
>> network user who's connection that does work (only difference is
>> line type, one analog this new one ISDN of course). Is this a
>> common error? Any suggestions?
>>
>> Thanks!
>> -Boze
>>
>> -
>> To unsubscribe, email 'majordomo@livingston.com' with
>> 'unsubscribe portmaster-users' in the body of the message.
>> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>>
>>
>
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-users' in the body of the message.
>Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>