(PM) Routing Help.

keith@mail.telestream.com
Thu, 16 Dec 1999 09:20:26 -0800 (PST)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Mazar@www.dci.co.ir: "(PM) PM3 and analog telephone lines"
Previous message: Eron Cohen: "RE: (PM) Problem With Portmaster 2E"
Next in thread: Al Hopper: "Re: (PM) bonding 2 bri's"

Posted this earlier. Think I need to better explain.
I have two class C's.. One OR T1/E1.
I've got the first /24 205.238.4.0 succesfully routed to the
ether0 which is on 205.238.4.1 heading into our network.
I need to get the second /24 routed as well. Is it even possible to route
the second /24 <205.238.16.0> to the same ether0?

add route 205.238.16.0 205.238.4.1 1
????

Or do I need to have a second router inside the network that is currently
working, that has a couple NIC's in it. One on the .4.0 network
with an IP of .4.2 gateway to the .4.1 ether0 on the OR. And put the
second nic as .16.0 and have it's gateway be the 1st nic on that machine.
.4.2

And then add a route in the OR for the .16.0 like this

add route 205.238.16.0 205.238.4.2 2

????
Hope I am making even a shread of sense here.. Thanks for any comments.

Keith

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

Next message: Mazar@www.dci.co.ir: "(PM) PM3 and analog telephone lines"
Previous message: Eron Cohen: "RE: (PM) Problem With Portmaster 2E"
Next in thread: Al Hopper: "Re: (PM) bonding 2 bri's"