Re: (PMOD) 3.8.2c2 and Global Village

Frank Washington (frankw@livingston.com)
Fri, 07 May 1999 13:38:48 -0700

Try limiting your V.90 connect speed to less than 45333 with an init string. Forward training from 45333 to more aggressive speed will cause this if there is high end roll off in those frequencies.

At 01:03 PM 5/7/99 -0700, William Sommers wrote:
>It's a bit early to make any generalizations about anything else --
>upgraded 3 PM3s first thing this morning -- but one particular modem is now
>definitely having problems.
>
>A Global Village 56K X2 (upgraded to V.90, current firmware and CCL
>versions) is regularly being tossed off with "Port Error - Exceeded LAPM
>retransmission limit" disconnects.
>
>Connects are consistently in the 45333 - 49333 range (was previously almost
>always 45333, and solid), but drop within 10 minutes, usually within 5.
>Over a dozen instances so far.
>
>No changes whatsoever on either end other than the 3.8.2 -> 3.8.2c2 upgrade.
>
>
> -wfs
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-modems' in the body of the message.
>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.