Esse funciona
[]s
Ivan
mick wrote:
>
> hello -
>
> having trouble with yet ANOTHER HSP modem that can't seem to connect to
> our portmaster 3s. this time the offender is a PCTEL HSP MICROMODEM -
> distributed by Zoltrix .. here's the ATI response:
>
> HSP MicroModem 56
> ATI1 A97/CO2
> ATI2 OK
> ATI3 PCtel 7.63-9CMS
> ATI4 PCtel Data/Fax/Voice/Speakerphone/V....
> ATI5 OK
> ATI6 OK
> ATI7 OK
> AT + FCLA...0,1,8
>
> i've tried forcing a connection at v.34, k56Flex and v.90, v.90 at 28.8
> and v.34 at 2400 bps manage to make it as far as the login: prompt
> before being disconnected. last night, i used the string
> AT&F&C1&D2&K3W1 (which I found at modemhelp.org) and the customer
> managed to connect. she remained connected for 10 to 15 minutes before
> voluntarily logging off (it didn't disconnect on her.) 30 minutes
> later, when she tried to reconnect, the modems could not establish a
> connection again.
>
> Zoltrix being the wonderful purveyor of quality hardware that it is,
> doesn't have ATI responses to match the modem directly on their site -
> i.e. I can't be sure that she's got the most recent drivers installed,
> because I can't find out which drivers she's supposed to have installed
> in the first place. i'm waiting for word back from them.
>
> hoping that someone out there has battled this particular brand of demon
> before.
>
> thank you.
>
> --
> mick szucs
> onramp network services inc.
> pgp id - 0x27FCD309
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-modems' in the body of the message.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.