Try AT+MS=K56 in the extra settings to keep high speed connections (FLEX mode)
if this doesn't work use AT+MS=V34 (Force V.34)
Also I previously sent out the AT%E1 command. This may help your user
because they are getting disconnected, versus inablity to connect.
NOTE: in extra settings you don't need the AT (eg. +MS=K56)
- Peter
"Robert H. Clugston" wrote:
>
> I have a user that frequently gets disconnected and has pauses in data
> throughput while using streaming applications. Here is his modem. Any help
> would be appreciated.
>
> rockwell soft56k modem
>
> ati1 255
> ati2 OK
> ati3 Softk56V_B2.1_V1.40
> ati4 Rockwell SoftK56 Data, Fax...
> ati5 181
> ati6 SoftK56
> ati6 CModem Version 11
> ati6 Rksample Version 330
> ati7 255
>
> ========================================================================
> Robert H. Clugston
> E-mail: robert@comstocknet.com
>
> Systems Administrator
> Comstock Net, www.comstocknet.com
> Phone: (909)877-6407
> ========================================================================
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-modems' in the body of the message.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.