Re: Reboots after pm2_3.3.2 Upgrade (fwd)

Gordon Soukoreff (gordon@knet.kootenay.net)
Wed, 11 Sep 1996 10:21:36 +0100

If I understand this is an " apply this fix if and only if " or
should you use 3.3.2c1 in place of 3.3.2 ?

g.g.
^.^.....Gordie Gizzmo ( a confirmed cyber-wittness )

On Tue, 10 Sep 1996, Igor V. Semenyuk wrote:

> > I have 3.3.2 on 3 of 10 PM2Es. Two run fine, one every so often starts
> > rebooting everytime a PPP auth request hits it(I have to repower to get it
> > stable) and another that I put it on always rebooted on PAP and I had to
> > reload 3.3.1. Is there a fix for 3.3.2 or should I replace it with 3.3.1 on
> > all my boxes?
>
> We had the same problem on one of our boxes and upgraded it to 3.3.2c1.
> Since that it looks ok. The fix is/was available at ftp.livingston.com
> as /pub/ts/pm2_3.3.2c1. The ts directory is unreadable (ls/dir doesn't
> work there) so you should use the exact name in get command.
>
> As far as I understand this is "technical support" patch to be installed
> only if advised by Livingston, but I saw many references to this patch
> fixing reboot problems that I beleive it got status of "normal" image.
>
> It's still not in /pub/le/upgrades though (just checked).
>
> --
> Igor V. Semenyuk Internet: iga@sovam.com
> SOVAM Teleport Phone: +7 095 258 4170
> Moscow, Russia Fax: +7 095 258 4133
>