Re: FR RS232 port not functioning in 3.3.2? (fwd)

Igor V. Semenyuk (iga@sovam.com)
Fri, 13 Sep 1996 20:52:30 +0400 (MSD)

>
> One thing to check - the FLASH layout under 3.3.2 and up is different from
> 3.3.1, the ports mainly effected at S0, P0, and W1. So some of the
> configuration may not have carried over properly in the upgrade - double
> check the port.

I can't reproduce the output of "sh w1" here because we have sent
the portmaster to the destionation, but certainly it was the correct
one albeit "Speed:" display. I even did re-enter DLCI mapping via
pmconsole and applied/saved/reset the port.

>
> Other than that there is no known problem with FR under 3.3.2c1, and many
> sites are running it. But I never ask sites if they are using RS-232 or
> V.35 so I don't know that they are on RS-232, but it really shouldn't matter.

Our engineer says the box did work with V.35 and 3.3.2. He's gone for
a vacation, and I will be able to conduct thorough tests only next
week. Should I contact Livingston support directly to open a ticket?

Still, is there anyone on the list having functioning portmaster running
ComOS 3.3.2 or higher with frame relay over RS232 interface?

-- 
Igor V. Semenyuk                    Internet: iga@sovam.com
SOVAM Teleport                      Phone:    +7 095 258 4170
Moscow, Russia                      Fax:      +7 095 258 4133