It looks like the Gandalf want to do PAP and not CHAP, andt the PM
wants to do CHAP and not PAP.
Hope this helps,
Bill
=20
On Wed, 2 Oct 1996 09:57:59 -0500 (CDT), you wrote:
>Here's a trace (with LCP decoded) of what happens when I try to dial =
from
>a Gandalf 5242 set to PAP to a PM-2 with 5-BRI. The PM has PAP and CHAP =
both
>enabled, and everybody else can log in fine.
>
>It seems no matter what the Gandalf sends, the PM sends an LCP_REFUSE =
specifying
>CHAP. Does that mean it WON'T do CHAP, or it WANTS to do CHAP?
>
>Received LCP_CONFIGURE_REQUEST on port S16 of 20 bytes containing:
>01 4c 00 18 01 04 05 ee 03 04 c0 23 05 06 5b b8=20
>d3 67 07 02 11 04 05 ee=20
>Fixed #bytes to match #found...
>Recvd from port S16: 26 bytes LCP Request-76=20
> Max-Recieve-Unit =3D 1518
> Authentication-Protocol =3D PAP
> Magic-Number =3D 0x5bb8d367
> Protocol-Field-Comp
> MP-MRRU =3D 1518=20
>
>Sending LCP_CONFIGURE_NAK to port S16 of 9 bytes containing:
>03 4c 00 09 03 05 c2 23 05=20
>Sent to port S16: 11 bytes LCP Refuse-76=20
> Authentication-Protocol =3D CHAP 0x05=20
>