Re: Great... out of memory

Dan Geiger (dang@livingston.com)
Mon, 21 Oct 1996 16:55:15 -0700

>Date: Mon, 21 Oct 1996 16:55:54 -0400 (EDT)
>From: "Matthew S. Crocker" <matthew@crocker.com>
>To: "Mark R. Baker" <mark@solunet.com>
>cc: Dave Berzins <berzins@nucleus.com>, portmaster-users@livingston.com
>Subject: Re: Great... out of memory
>Sender: owner-portmaster-users
>Reply-To: "Matthew S. Crocker" <matthew@crocker.com>
>
>> >PM2E 30's (serial) don't need more, then fine, but why the hell are the BRI
>> >units still being shipped with 1MB? And yes, I can't find such memory
either!
>
>www.pny.com
>
>-Matt
>
>

I'm not sure what you mean when you say, "I can't find such memory either"?
If you do want to expand your memory, you can do it by replacing the four
256KB SIMMs with either 1MB or 4MB SIMMs. These are standard 30 pin SIMMs
that are readily available thru memory retailers (same type of SIMMs used to
upgrade PCs from 8 to 16MB for instance). Please let me know if this does
not address your question of where to find. Also, I will check in further
to see why we offer these with 1MB (if more than 1MB is required).

Regards,

Dan Geiger

==============================
Dan Geiger
Product Marketing
Livingston Enterprises
dang@livingston.com
510-485-6676
www.livingston.com