Re: PM2e and PM2er hate each other
John G. Thompson (jgt10@livingston.com)
Fri, 6 Dec 1996 08:04:35 -0800 (PST)
On Thu, 5 Dec 1996, CygNet Support wrote:
>
> Just recently installed a PM2e on the same segment as a existing PM2er. If
> I telnet to our system I am able to ping both the ether0 on either box. If
> I telnet into the PM2e and ping the PM2er it is not found. If I telnet into
> the PM2er and ping the PM2e that box is not found. Each of the boxes should
> be able to see each other shouldn't they????
Sounds like a routing issue. What are the IP addresses and netmasks on
the PM2E, PM2ER and the system you mention?
JGT
--
John G. Thompson Livingston Enterprises Inc. Phone: (800) 458-9966
JOAT(MON) 4464 Willow Road Fax: (510) 426-8951
support@livingston.com Pleasanton, CA 94588 http://www.livingston.com