Re: RJ-48C?

Ronnie D. Franklin (ronnie@itexas.net)
Wed, 11 Dec 1996 21:47:16 -0600

An RJ-48C is an RJ-45 with a tab on the side of the connector.. The RJ-45
is actually a Audio or Analog connector.. An RJ-45 connector will work
fine into an RJ-48C jack.

Thanks,

Ronnie Franklin
===========================================================
Logical Data Systems & Services Internet Texas
3435 Peak Road
http://www.itexas.net/
Granbury, Texas 76048
mailto:ldss@itexas.net

817-279-8100 voice 817-279-0452 fax

----------
> From: Evan Champion <evanc@synapse.net>
> To: portmaster-users@livingston.com
> Subject: RJ-48C?
> Date: Wednesday, December 11, 1996 4:22 PM
>
> Bell is coming to do our 2 PRI install tomorrow. Apparently what they
> are doing is putting in an HDSL box which has a single RJ-48C port
> which will carry both PRIs.
>
> My question is what am I supposed to do with the RJ-48C? The PM3 has
> dual RJ-45 ports rather than an RJ-48C.
>
> Any help would be very much appreciated.
>
> Evan
> --
> Evan Champion * Director, Network Operations
> mailto:evanc@synapse.net * Directeur, Exploitation du reseau
> http://www.synapse.net/ * Synapse Internet