>>199.84.52.192/26 (a 64 host block). I did a "set assigned 199.84.52.193".
>>Does the PM3 just take the first 48 ports starting with 193? How do I get
>>the PM3 to broadcast the 199.84.52.192/26 (via OSPF)?
>
>I'll have to check on this for the PM-3. The way PM's usually work is by
>counting the number of ports on boot and making a pool that large - starting
>with the IP you set. But I'm not sure what the PM-3 'counts'.
>
>Marty, do you know?
>
The way the PM3 allocates IP addresses is basically a two step process. One, it looks to see the total number of ports configured for network dial-in at boot. Second it looks to see the number configured thru the set pool command. Starting with the assigned base address, it counts up.
I believe the broadcast happens automatically, no configuration necessary.
--Marty
****************************************************************
Marty Likier Livingston Worldwide Headquarters
Product Marketing Mgr. 4464 Willow Road
(800) 458-9966 Pleasanton, CA 94588 USA
(510) 737-2164 (510) 244-1903 (FAX)
marty@livingston.com Web:
<color><param>0000,0000,ffff</param>http://www.livingston.com
</color>****************************************************************