Re: K56Plus / x2 Modems

Portmaster-Users Mailbox (portmaster@baddog.sp.utoledo.edu)
Sun, 22 Dec 1996 13:43:45 -0500 (EST)

What kind of a rack modems support a T-1 interface? I was under the
impression that in order to use channelized T-1 you needed some type of
channel bank such as a NuBridge. Can you elaborate?

Thanks.

-Allen

On Sun, 22 Dec 1996, Marty Likier wrote:

> At 09:37 AM 12/21/96 -0600, Ron Long wrote:
> >Will this technology work with the PM2 product line? That is assuming you
> >have a rack of modems with a T1 interface (PRI not available here) I have
> >gotten confused after reading white paper after black paper, after blue
> >paper. I understand that to work, the ISP must have a digital connection
> >to the CO (T1 / PRI) but what happens when the signal comes out of the
> >modem into a 232 cable and into the PM2? Does this nullify the digital
> >connection?
>
> This would work fine. The signal only has to remain digital on the telco
> side. The rs-232 backend is no problem.
> --
> Marty Likier
> Product Marketing Mgr.
> marty@livingston.com
>