> 2) The various machines are not passing the correct netmasks with RIP routes.
> I use radius with a Framed-Route = "xxx.xxx.xxx.xxx/28 yyy.yyy.yyy.yyy 1"
> (/27 /28 or /29) and the PM3 and 2E units pick up the correct route but the
> IRXs will sometimes be correct and sometimes be /32 or /24.
Looks like these routes are coming from RIP and not OSPF. First if
everything is on OSPF, you need to turn off RIP. Otherwise you may get
strange routing loops as OSPF routes are redistributed via RIP and
vice versa. RIP has no netmasks, and therefore must pass either a host
route (/32) or a network route (/24). Are the IRX's talking to anything
else with RIP?