Lets try and keep it a little clean...thanks
> From: CEvoy@lonet.ca (Chris Evoy)
> To: <portmaster-users@livingston.com>
> Subject: Dead PM-3
> Date: Sat, 3 May 1997 16:10:34 -0400
> Reply-to: CEvoy@lonet.ca (Chris Evoy)
> One of my PM-3s just went tits up on me. I have tftp'ed the generic.pm3
> into it but it still fails to load the comos. It seems to fail at the same
> point with a netboot or not. It looks like it may be memory but I swapped
> it out and same thing. Any ideas? Do I need a box rma'd to me? Livingston
> support? Anyone?
>
> Here is the output from netbooting:
>
> Livingston Enterprises, Inc. Boot Prom Rev P
>
> Testing Low Memory....
> Checking Boot Rom....
> Testing System Clock....
> Sizing System Memory... 8MB
> CPU Type.... 486DE2-66
> Starting Net Boot.....
>
> > address 207.134.187.7
> OK
> > tftp 207.134.187.16
> Starting tftp...
> Requesting tftp of CF86BB07.PM3 from server 207.134.187.16
> Loading Image at 00100000
> 393192 tftp complete
> Verifying Loader Module Checksum...
> Starting Loader ...
> Loading kernel... 744532 bytes
> Testing High Memory ... . 8192K
>
> Here is the output without netbooting:
>
> Livingston Enterprises, Inc. Boot Prom Rev P
>
> Testing Low Memory....
> Checking Boot Rom....
> Testing System Clock....
> Sizing System Memory... 4MB
> CPU Type.... 486DE2-66
> Starting FLASH Boot.....
> Booting From Flash Type Am29F040
> 16384 flash copy complete
> Verifying Loader Module Checksum...
> Starting Loader ...
> Loading kernel... 766412 bytes
> Testing High Memory ... . 4096K
>
> Regards,
>
> Chris Evoy
> Systems Admin
> HyperNet
> cevoy@lonet.ca
> (519) 652-3790
>
>
>
>
>