> Hi,
>
> Recently, I plan to set the syslog with Portmaster 2e. After
> configurate,
> Portmaster by command set loghost, then I change the syslog.conf
> as the following and restart deamon. The loghost uses redhat 4.1.
>
> The syslog host doesn't show up any log generated by portmaster.
> When I type "sh netconn", 514 port is shown up as UDP. Can anyone give
> me suggestion.
>
>
Well, what you might want to check (and I've ran into this problem too) is
your man page for syslogd.
Some syslogd's require that you specifically tell it to accept remote
(network) logging.
you do this by starting syslog with the -r command in your rc files...
that should likely take care of it
/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/
Chris Gauthier - Administration, Development chris@icenter.net
IC Enternet - Winnipeg's Premier ISP (204)958-9400 V o i c e
17 St. Mary's Rd. - Winnipeg, MB, R2H 1H2 (204)958-9411 F a x
-- If you think the problem is complicated now, just wait until we've got
it solved.
/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/=/