Re: (PM) Modem Problem

Thomas C. Kinnen (tkinnen@livingston.com)
Sun, 07 Mar 1999 16:16:32 -0800

admin@2xtreme.net wrote:
>
> I'm new to the PM3 and I have a modem that is not working right.
> I'm used to working with the 3com total control. I've got this box
> configured for v.90 dial-up only with 48 modems. Here is what my
> PM3 output looks like:

To help people will need to know what type of line the telco has provided
you and how you have the line configured on the PM. A 'show line0' and
'show line1' will display what the incoming lines are currently configured
for on the PortMaster. Also a 'show global' will show the current switch
type settings.


> show s3
> --------------------- Current Status - ISDN Port S3 ------------------------

The port is set for ISDN. Are you using PRI lines or Channilized T1?

>
> Active Configuration Default Configuration (* = Host
> -------------------- --------------------- Can Override)
> Port Type: Login Login (Security)
> Login Service: PortMaster PortMaster
> Line Speed: 64000 64000
> Hosts: default

Right now this port is setup for Login service to a host and not PPP/SLIP.
Is that what you want?

> Terminal Type:
> Login Prompt: $hostname login:
> Idle Timeout: 20 minutes
> Login Message: ø[^ÉÉöU‰åƒìWVSŠ]ˆ]üf‹uŠ] ˆ]ø‰ñfƒáfƒùt

The login message looks to be a bit off unless you have it set to something
from a different character set.

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>