Re: (PM) ADSL on a PM3

Douglas Michaud (admin6@teleport.com)
Thu, 11 Mar 1999 14:17:56 -0800

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: John Lange: "Re: (PM) New 1675 DSP's"
Previous message: Russ Taylor: "Re: (PM) New 1675 DSP's"
Maybe in reply to: R Gibbons: "(PM) ADSL on a PM3"

In message <14056.10814.795272.373287@rtfm.ofc.tekinteractive.com>, "Todd R. Ei
genschink" writes:
>R Gibbons writes:
>>I spoke with some Lucent folks at ISPF and was told that the PM3
>>was capable of doing ADSL over a GTE Frame circuit. It wasn't clear
>>if this was a service unique to GTE or if other telcos can do it as
>>well e.g. PacBell. Is anyone here doing ADSL on a PM3 and if so what
>>was involved in setting it up?
>
>GTE delivers ADSL on a PVC of a frame relay circuit. To the router
>(be it Cisco, Lucent, or whatever), it's just another PVC.

doing the PVC would be cake, but the pm can't bridge, and that's the
current setup for GTE, so it would be a no-go on the pm3.

-------
Douglas Michaud, {dmichaud|admin6}@teleport.com, Network Engineering
PGP Id=FADF93C5, Fprint=B9 04 FD FA E7 4C 83 69 DD 45 E2 D2 17 D5 DD 2F
Teleport, Inc | 319 SW Washington #400, PDX OR | 503.223.0076

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>

Next message: John Lange: "Re: (PM) New 1675 DSP's"
Previous message: Russ Taylor: "Re: (PM) New 1675 DSP's"
Maybe in reply to: R Gibbons: "(PM) ADSL on a PM3"