Re: (PM) Channelized E1 connectivity

John G. Thompson (jgt10@livingston.com)
Fri, 19 Mar 1999 17:00:01 -0800

At 11:39 AM 03/16/99 -0800, Thomas C. Kinnen wrote:
>"Nair, Shibu (MED, Wipro Systems, Inc)" wrote:
>> Is it possible to configure PM3 (In USA) for channelized E1 connectivity
>> (Not PRI)...?
>> So that i will get 30, 64Kbps channels to the EPABX....
>> If so how do i configure ?
[snip]
>...You will need to check with sales as I do
>not know if the E1 version can be purchased in North America.

You will need a PM-3x-1E or -2E. The PM-3x-xT CAN NOT talk to an E1 line.
The units are physically different and have different chipsets for the T1
and E1 versions.

JGT
---------------------------------------------------------------------------
John G. Thompson Technical Support STAFF Engineer aka JOAT(MON)

---==####==---Lucent Technologies Remote Access Business Unit---==####==---
4464 Willow Road ftp://ftp.livingston.com/ Tel: (800) 458-9966
Pleasanton, CA 94588 http://www.livingston.com/ Fax: (925) 737-2110
---------------------------------------------------------------------------
******* The solution to any problem lies in its proper definition. *******
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>