> pm3-1> sh loc Sav
> Location: Sav Type: Manual
> Destination: 10.12.12.253 Netmask: 0.0.0.0
Try setting the correct netmask. If this is a single IP address try:
255.255.255.255.
> Local IP: 10.12.12.252
IS this the same as your reported or local IP address?
> Protocol: PPP Options: Quiet, CHAP
Are you sure the remote location supports CHAP? You may also want to set
PAP on.
> Group: 0 Max Ports: 1
> Idle Timeout: 0 minutes High Mark: 0 bytes
> Mtu: 1500 Async Map: 00000000
> Username: sav Password: HIDDEN
> Telephone: 84075999
>
Also you may want to get one of the JAVA PPP debug tools and see where the
connection is failing after the PPP starts.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>