Larry L.
----- Original Message -----
From: Thomas C Kinnen <tkinnen@livingston.com>
To: Larry <pm3@utec.net>
Cc: <portmaster-users@livingston.com>
Sent: Tuesday, March 23, 1999 12:18 AM
Subject: Re: (PM) All circuts busy
> > Larry wrote:
>
> Please no HTML on the list.
>
> > We've got 6 PM3's on 3 different hunt groups 1 on CT1
> > the others on PRI after taking 23 calls it doesn't
> > matter which hunt groups they come on all the rest of our customers
> > start getting " all circuits are busy " from the phone switch
> > telco clam's there is nothing wrong with there lines its our equipment
> > so the big question is. Is it possible to configure the PM3's to cause
> > this
>
> If you set the rest of the ports for dial out only.
>
> > or maybe something in radius.
> > we did put 2 new PRI's in but there not working yet the new PM3' is on
> > line
> > the PRI's are down for this box
>
> Sounds like the hunt group is not setup correctly. Now the big question,
> did it ever work? And if it did what has changed?
>
> --
> Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not my employer's,
> unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>