Re: (PM) Multiple Pm2e on same Subnet

Thomas C Kinnen (tkinnen@livingston.com)
Thu, 25 Mar 1999 08:11:20 -0800

Richard Ishmael wrote:

> We are currently using RIP. Why will just telling our router statically,
> that the next hop for the first 30 IPs of the subnet is one PM2e and the
> following 30 is another PM2e?

Remember that RIP will not do VLSM so depending on where your boundaries are
for the routes things may be getting broken.

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"




-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>