> > 2. Having problems with an Netgear RT328 connecting to PM3 (COMOS 3.8.2)
> > wtih 2 channels using BOD. Only can make single channel work. Checked
> > out Netgear web page and they recommend disabling BACP on RT328 to get 2
> > channels to work.
I have observed similar problems to PM3 and OR-ST machines, both running
3.7, when a Zyxel Prestige 128 dials in. There is no option to disable
BACP negotiation on the Prestige, so the only fix we could come up with
was to use single channel access at all times.
Which to be honest, was strange, because when using earlier versions of
ComOS, it seemed to work OK. What changed? ;^)
Since teh OR series is jammed on 3.7, it's unlikely that I can fix this
with a 3.8 upgrade in the near future - or does anyone at Livingston
know better?
Finally, when is NAT going to be supported by OR releases (the prime
candidate for this feature)?
Rob Schofield
-- First mechanically-generated printout from the newly-constructed Babbage calculating engine produced from the inventor's original drawings:"File or command not found. Abort, Retry, Fail?" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>