(PM) Connecting a PM3->IRX211

Dilbert (dilbert@mds.net)
Tue, 13 Apr 1999 06:49:49 -0500

Is it possible to connect an IRX-211 to a PM3 via the async ports, i.e.,
the C0 on the PM3 to the S0 on the IRX? I tried all day on Saturday to make
the connection without success. If I turn cd off both ports show
"connecting" but never get established. When cd is on the port shows idle.

Maybe I'm going about this the wrong way. I'm trying to establish a
separate office network via the IRX by using the IP address of the PM3 as
the gateway, and only using one IP number out of a class C. The IRX would
have the "real" IP number, while the internal hosts would have the 10.0.0.0
numbers.

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>