Re: Routing different Subnets thru PM2E

Vince Callaway (vince@web.wa.net)
Tue, 22 Oct 1996 11:52:10 -0700

We currently route address blocks on dialups. The only problem that I
have found that is not well documented is that you have to have the
subnet mask in the netmasks tables on ALL livingstons on your lan.

Our PM2ER also does not seem to broadcast the subnet mask properly to
our main cisco.

this is a real working radius entry:

fisonp Password = "xxxxxx"
User-Service-Type = Framed-User, Framed-Protocol = PPP,Port-Limi
t = 1, Framed-Address = 206.129.184.12, Framed-Route = "206.129.188.16 206.129.1
84.12 1"

One thing different than the sample you showed is that you have the assigned
ip in the same class C as your are routing. We have a pool that we use for
static IP's and assign subnet blocks out of other class C's based on the
size of subnet the customer actually needs.
--------------
Vince Callaway
Washington Internet Services (206) 926-2552
1-888-WA.DOT.NET http://www.wa.net