We successfully used a PM3 on COVAD ADSL for a week until we had an open
port on our cisco.
R Gibbons wrote:
>
> I spoke with some Lucent folks at ISPF and was told that the PM3
> was capable of doing ADSL over a GTE Frame circuit. It wasn't clear
> if this was a service unique to GTE or if other telcos can do it as
> well e.g. PacBell. Is anyone here doing ADSL on a PM3 and if so what
> was involved in setting it up?
>
> Rich Gibbons
> EmpireNet Inc.
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>