> If I do a winipcfg command from the Win '98 box I've used to dial in, it shows
> the default gateway as the ip address from the modem pool. Shouldn't that be the
> address of our border router? If so, how do I configure that? I have already
> specified the IP gateway correctly.
No the gateway should be it's IP address as it is as /32 subnet and that is
the gateway to the rest of the world.
> Secondly, I have set up the PM2E30 with a DNS entry and an in.addr-arpa entry as
> well. However, should I also give each of the modem pool IP's a DNS entry too? I
> have PMVision and there is a section, under Configure/Global to insert an IP
> address for "reported IP address".
You should setup DNS for each IP in the IP address pool.
-- Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>