Rob Schofield wrote:
> > Subject: Re: (PM) ISDN BOD
>
> > > 2. Having problems with an Netgear RT328 connecting to PM3 (COMOS 3.8.2)
> > > wtih 2 channels using BOD. Only can make single channel work. Checked
> > > out Netgear web page and they recommend disabling BACP on RT328 to get 2
> > > channels to work.
>
> I have observed similar problems to PM3 and OR-ST machines, both running
> 3.7, when a Zyxel Prestige 128 dials in. There is no option to disable
> BACP negotiation on the Prestige, so the only fix we could come up with
> was to use single channel access at all times.
>
> Which to be honest, was strange, because when using earlier versions of
> ComOS, it seemed to work OK. What changed? ;^)
>
> Since teh OR series is jammed on 3.7, it's unlikely that I can fix this
> with a 3.8 upgrade in the near future - or does anyone at Livingston
> know better?
>
> Finally, when is NAT going to be supported by OR releases (the prime
> candidate for this feature)?
>
> Rob Schofield
> --
> First mechanically-generated printout from the newly-constructed Babbage
> calculating engine produced from the inventor's original drawings:
>
> "File or command not found. Abort, Retry, Fail?"
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>