---------------------- line0 - T1 Primary Rate ISDN ---------------
Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
Receive Level: -7.5dB to -15dB
Alarms Violations
----------------------------- -----------------------------
Blue 0 Bipolar 0
Yellow 0 CRC Errors 0
Receive Carrier Loss 0 Multiframe Sync 0
Loss of Sync 0
Command> sh line1
---------------------- line1 - T1 Primary Rate ISDN ---------------
Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
Receive Level: +2dB to -7.5dB
Alarms Violations
----------------------------- -----------------------------
Blue 0 Bipolar 0
Yellow 0 CRC Errors 0
Receive Carrier Loss 0 Multiframe Sync 0
Loss of Sync 0
Command> ver
Livingston PortMaster PM-3 ComOS 3.8
System uptime is 7 days 6 hours 40 minutes
----- Original Message -----
From: Tim Tsai <tim@futuresouth.com>
To: Bubba_Smith <bubba@premierweb.net>
Sent: Wednesday, April 14, 1999 3:45 PM
Subject: Re: (PM) PRIs from Different Telcos
> Have the Telco look into line padding and digital pad on the switch.
> Unfortunately there isn't a recommendation guide on what you can do here.
>
> It's curious that ISDN doesn't work though - sounds like there might
> be some kind of loss [physical or digital] in the path. Get on the phone
> with the switch engineer of KMC and see if he's got other PM3 customers.
> I've only seen ISDN dead air on a PRI when it's misconfigured on the
> Telco end - never the PM3 (modem performance is a different issue).
>
> PS: What type of switch on BellSouth and KMC?
>
> Tim
>
> On Wed, Apr 14, 1999 at 03:25:28PM -0400, Bubba_Smith wrote:
> > We are transitioning from one telco to the other and for now, have two
PRIs
> > in our last PM3 from separate telcos (one old BellSouth, one new KMC).
Once
> > we get all of our users over to the new number, we will have all PRIs
from
> > KMC.
> > Before we started changing over, everybody was connecting to us just
peachy.
> > Now, connecting thru the old PRI is erratic at best, especially ISDN
> > connections that once were rock-solid. ISDN customers are connecting and
> > getting dead air; dial-ups are having to dial 3-4-5 times before they
> > connect.
> > Can't the PM3 handle PRIs from different carriers? What else might it
be?
> >
> > Thanks in advance,
> > Bubba Smith
> > Premier Internet
> >
> >
> > -
> > To unsubscribe, email 'majordomo@livingston.com' with
> > 'unsubscribe portmaster-users' in the body of the message.
> > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>